The New 350-801 2026 Updated Verified Study Guides & Best Courses
Authentic 350-801 Exam Dumps PDF - 2026 Updated
Cisco 350-801 certification exam is an important qualification for professionals who need to demonstrate their expertise in implementing and operating Cisco Collaboration Core Technologies. 350-801 exam is designed to test the candidate's knowledge of the latest collaboration technologies, including Cisco Unified Communications Manager, Cisco Unity Connection, Cisco IM and Presence, and Cisco Expressway. Passing 350-801 exam is a significant step towards becoming a certified Cisco Collaboration Core Technologies professional.
NEW QUESTION # 207
Refer to the exhibit. How must the +E.164 translation pattern be configured to reach international number 496929810?
- A. Pattern= \+.496929810, CSS=Intl_CSS, PreDot, Prefix=777011
- B. Pattem= \+.777011496929810, CSS=Intl_CSS
- C. Pattern= \+.011496929810, CSS=Global-CSS, PreDot, Prefix=777
- D. Pattern= \+.496929810, CSS=Unrestricted-CSS, PreDot, Prefix=777011
Answer: A
Explanation:
B is incorrect since it doesn't state in the answer that the translation pattern will discard the
"Pre.Dot", which means the final pattern will have the "+" sign at the beginning which will not match the route pattern in the screenshot which doesn't have a "+" sign, however if we use the translation pattern in Answer D we will be able to achieve that since the "+" will be discarded and
777011 will be prefixed so the final pattern will be 777011496929810 == Match.
NEW QUESTION # 208
Which command enables SIP OAuth mode on a Cisco UCM publisher node?
- A. utils sipOAuth-mode enable
- B. utils sip-OAuth-mode enable
- C. utils sipOAuth-mode activate
- D. utils sip-OAuth-mode activate
Answer: A
Explanation:
Use the Publisher's Command Line Interface to enable SIP OAuth mode globally. Run the command: utils sipOAuth-mode enable.
https://www.cisco.com/c/en/us/support/docs/unified-communications/jabber/215572-cisco-jabber- and-sip-oauth-mode.html
NEW QUESTION # 209
An engineer must configure an MGCP gateway and register it to Cisco Unified Communications Manager.
Which prerequisite must be met before applying the gateway commands to enable MGCP?
- A. Cisco Unified CM and the MGCP gateway must utilize the SIP OPTIONS ping feature to monitor status.
- B. The MGCP gateway and the Cisco Unified CM must be able to communicate over ports 2427, 2428, and
2727. - C. The MGCP gateway and the Cisco Unified CM must be able to communicate aver ports 5060 and 5061.
- D. The MGCP gateway must have voice service VoIP configured.
Answer: B
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios/voice/cminterop/configuration/guide/12_4t/ vc_12_4t_book/vc_ucm_mgcp_gw.html
NEW QUESTION # 210
Where is Directory Connector hosted in a Cisco Webex Hybrid Services deployment?
- A. on an on-premises Microsoft Active Directory server
- B. on a Cisco Expressway-C connector host server
- C. on a dedicated on-premises server
- D. on a server in the Webex Data Center
Answer: C
Explanation:
The Cisco Directory Connector is a software application that is installed on a dedicated on-premises server. It synchronizes user identities between the on-premises directory and the Cisco Webex cloud.
NEW QUESTION # 211 
Refer to the exhibit. A collaboration engineer adds a redundant NTP server to an existing Cisco Collaboration solution On the Cisco UCM OS Administration page, the new NTP server shows as "Not Accessible" Which action resolves this issue?
- A. Restart NTPD on the Cisco UCM server.
- B. Configure the "reach" value as "377" for the new NTP server.
- C. Delete and re-add the new NTP server via the Cisco UCM command-line interface
- D. Start the NTP service on the new NTP server
Answer: D
NEW QUESTION # 212
According to QoS guidelines, what is the packet loss for streaming video?
- A. Not more than 1%
- B. Not more than 8%
- C. Not more than 3%
- D. Not more than 5%
Answer: D
Explanation:
When addressing the QoS needs of Streaming-Video traffic, the following guidelines are recommended:
- Streaming-Video (whether unicast or multicast) should be marked to DSCP CS4, as designated by the QoS Baseline.
- Loss should be no more than 5 percent.
https://www.ciscopress.com/articles/article.asp?p=357102&seqNum=2
NEW QUESTION # 213
Where is urgent priority enabled to bypass the T302 timer?
- A. directory number
- B. CTI port
- C. route partition
- D. transformation pattern
Answer: A
Explanation:
Directory Number has 'Urgent Priority' Check Box after the DN field.
NEW QUESTION # 214
An administrator needs to stop the leading 9 from outbound calls on an IOS Voice Gateway and ensure that the system handles 911 emergency calls Which configuration is needed to accomplish this task?
A)
B)
C)
D)
- A. Exhibit B
- B. Exhibit D
- C. Exhibit C
- D. Exhibit A
Answer: A
NEW QUESTION # 215
Which two actions must be taken to provision a new device using self-provisioning?
- A. Enable the self-provisioning IVR in the Cisco UCM
- B. Link the appropriate universal device template to the user profile.
- C. Link the appropriate service profile to the provisioning template.
- D. Import the user profile to the corporate LDAP directory.
- E. Ensure the user has a directory URI and a primary extension.
Answer: A,B
Explanation:
Self-Provisioning of a phone to a user needs:
* an End user with a primary extension and a Feature Group Template
* the Feature Group Template needs a User Profile
* the User Profile needs a Universal Line and Universal Device Template Finally to activate it you need a CTI route point and a configured IVR service to actually register it.
HOWEVER, it looks like you dont actually NEED the IVR to technically fullfil the goal of self- registration, as users can use the URL based registration. but i am not 100% sure if you wont need the IVR anyways, even if you arent using it - the guide is not 100% clear on that
https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications- manager-callmanager/214228-configure-self-provisioning-feature-on-c.html
NEW QUESTION # 216
A Cisco Unity Connection Administrator must set a voice mailbox so that it can be accessed from a secondary device.
Which configuration on the voice mailbox makes this change?
- A. Alternate Names
- B. Attempt Forward routing rule
- C. Mobile User
- D. Alternate Extensions
Answer: D
Explanation:
If you elect to make changes to the Cisco Unity system, there are two options available:
- Call Routing Rules (available in all Cisco Unity versions)
- Using the Alternate Extension feature (available in Cisco Unity 3.0 and later).
https://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unity/41600-2-ip- phones-1-mbox.html#ts1
NEW QUESTION # 217
Refer to the exhibit. A call to an international number has failed.
Which action corrects this problem?
- A. Add the isdn switch-type primart-dms100 command to the serial interface.
- B. Add the bearer-cap speech command to the voice port.
- C. Assign a transcoder to the MRGL of the gateway.
- D. Strip the leading 011 from the called party number
Answer: D
NEW QUESTION # 218
What is the major difference between the two possible Cisco IM and Presence high-availability modes?
- A. Balanced mode provides user load balancing and user failover only for manually generated failovers.
Active/standby mode provides an unconfigured standby node in the event of an outage, but it does not provide load balancing. - B. Balanced mode provides user load balancing and user failover in the event of an outage. Active/standby mode provides an always on standby node in the event of an outage, but it does not provide load balancing.
- C. Balanced mode provides user load balancing and user failover in the event of an outage. Active/standby mode provides an always on standby node in the event of an outage, and it also provides load balancing.
- D. Balanced mode does not provide user load balancing, but it provides in the event of an outage. Active/ standby mode provides an always on standby node in the event of an outage, but it does not provide load balancing.
Answer: B
Explanation:
Section: Collaboration Applications
NEW QUESTION # 219
After an engineer runs the utils ntp status command on the Cisco Unified Communications Manager publisher, the stratum value is 16. Which issue can the Cisco Unified CM cluster experience?
- A. Unified CM sends an NTPv4 packet.
- B. Database replication is not synchronized on the Unified CM nodes.
- C. The cluster loses access to port 124 at the firewall.
- D. The date/time group an all phones default to the time zone of the engineer.
Answer: B
Explanation:
16 is a invalid stratum value that means "this server is not considered a time provider". The stratum can be invalid for various reasons, the most common of which is that the "time provider not synchronized", the "configured source does not exist", or the "ntp server not running". CUCM can communicate with the NTP server on Port 123.
NEW QUESTION # 220
An engineer configures a new phone in Cisco UCM The phone boots and gets IP when it connects to the network, however the phone fails to register With CISCO UCM, The engineer observes that the phone has a status Rejected In CISCO UCM What must be verified first 'Mien troubleshooting the issue?
- A. whether the Initial Trust List and Certificate Trust List files on the phone are correct
- B. whether the phone's MAC address is correct In Cisco UCM
- C. whether auto-registration is enabled in Cisco UCM
- D. whether the phone ts in the correct VLAN
Answer: C
Explanation:
This is the first thing that must be verified when troubleshooting the issue of phone status showing rejected in Cisco UCM1. Auto-registration allows new phones to register with Cisco UCM without manual configuration
1. If auto-registration is disabled, the phone will not be able to register and will show a rejected status1.
The other options are not the first things that must be verified when troubleshooting the issue:
* B. whether the Initial Trust List and Certificate Trust List files on the phone are correct is not the first thing to verify, but it may be a possible cause of the issue if the phone has an ITL file from another cluster that prevents it from registering with Cisco UCM2. To resolve this issue, the ITL file needs to be deleted from the phone or exchanged between the clusters2.
* C. whether the phone is in the correct VLAN is not the first thing to verify, but it may be a possible cause of the issue if the phone is not in the same VLAN as the Cisco UCM server or cannot reach it due to network issues3. To resolve this issue, the network connectivity and VLAN configuration need to be checked and fixed3.
* D. whether the phone's MAC address is correct in Cisco UCM is not the first thing to verify, but it may be a possible cause of the issue if the phone's MAC address does not match the one configured in Cisco UCM. To resolve this issue, the MAC address needs to be corrected and updated in Cisco UCM.
NEW QUESTION # 221
Which attribute contains an XMPP stanza?
- A. type
- B. iq
- C. presence
- D. message
Answer: A
NEW QUESTION # 222 
An engineer is trying to add a new subscriber to the cluster of Cisco UCM. and the synchronization is failing.
The engineer obtained the output from the publisher and noticed the error Based on the output, what is the issue?
- A. The NTP service is pointing to the wrong publisher.
- B. The NTP server must be replaced by another server with NTP stratum 1, 2, or 3 running version NTPv4.
- C. The NTP server for Cisco UCM must be stratum 6 or higher.
- D. The NTP server is running out of space in the hard drive, which prevents the cluster service from starting.
Answer: B
NEW QUESTION # 223
According to the QoS Baseline Model, drag and drop the applications form the left onto the correct per-Hop Behaviour values on the right.
Answer:
Explanation:
Explanation
Voice = EF
Interactive Video = AF41
Bulk Data = AF11
Call-Signaling = AF31/CS3
Network Management = CS2
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND/QoS-SRND-Book/Qo
NEW QUESTION # 224
Refer to the exhibit.
What is the result of applying these two rules to a voice translation-profile for use with an ISDT1 PRI on a Cisco Voice gateway?
- A. The ISDN Plan is modified to the administrators defined value.
- B. Any Zero is stripped from the numeric phone number.
- C. The leading Plus is stripped from the numeric phone number.
- D. The ISDN Type is modified to the administrators defined value.
Answer: D
NEW QUESTION # 225
......
Get Prepared for Your 350-801 Exam With Actual 408 Questions: https://torrentpdf.practicedump.com/350-801-exam-questions.html