Best Value Available! 2025 Realistic Verified Free 300-710 Exam Questions
Pass Your Exam Easily! 300-710 Real Question Answers Updated
Cisco 300-710 certification exam is an industry-recognized credential that validates the knowledge and skills of IT professionals in network security using Cisco Firepower NGFW solutions. Securing Networks with Cisco Firepower certification is intended for network security engineers, network administrators, security analysts, and security consultants who are responsible for designing, deploying, and managing security solutions for their organizations. Earning this certification demonstrates an individual's expertise in securing networks with Cisco Firepower, and can help to advance their career in the field of network security.
NEW QUESTION # 196
An organization does not want to use the default Cisco Firepower block page when blocking HTTP traffic. The organization wants to include information about its policies and procedures to help educate the users whenever a block occurs. Which two steps must be taken to meet these requirements? (Choose two.)
- A. Modify the system-provided block page result using Python.
- B. Write CSS code with the information for the policies and procedures.
- C. Create HTML code with the information for the policies and procedures.
- D. Change the HTTP response in the access control policy to custom.
- E. Edit the HTTP request handling in the access control policy to customized block.
Answer: D,E
NEW QUESTION # 197
An engineer is restoring a Cisco FTD configuration from a remote backup using the command restore remote-manager-backup location 1.1.1.1 admin /volume/home/admin BACKUP_Cisc394602314.zip on a Cisco FMG. After connecting to the repository, an error occurred that prevents the FTD device from accepting the backup file. What is the problem?
- A. The backup file was not enabled prior to being applied
- B. The backup file is too large for the Cisco FTD device
- C. The backup file is not in .cfg format.
- D. The backup file extension was changed from tar to zip
Answer: D
NEW QUESTION # 198
Which Cisco Advanced Malware Protection for Endpoints policy is used only for monitoring endpoint actively?
- A. triage
- B. Windows domain controller
- C. audit
- D. protection
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/amp-endpoints/214933-amp-for-endpoints- deployment-methodology.html
NEW QUESTION # 199
When creating a report template, how can the results be limited to show only the activity of a specific subnet?
- A. Create a custom search in Firepower Management Center and select it in each section of the report.
- B. Select IP Address as the X-Axis in each section of the report.
- C. Add an Input Parameter in the Advanced Settings of the report, and set the type to Network/IP.
- D. Add a Table View section to the report with the Search field defined as the network in CIDR format.
Answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firesight/541/user-guide/FireSIGHT-System-UserGuide-v5401/Reports.html#87267
NEW QUESTION # 200 
Refer to the exhibit. An engineer configures a NAT rule allowing clients to use the internet only if clients are located on the directly connected internal network. Dynamic auto PAT must be configured. Drag and drop the NAT rules from the left onto the corresponding targets on the right. Not all options are used.
Answer:
Explanation:
Explanation:
A screenshot of a computer AI-generated content may be incorrect.
NEW QUESTION # 201
An engineer is attempting to create a new dashboard within the Cisco FMC to have a single view with widgets from many of the other dashboards. The goal is to have a mixture of threat and security related widgets along with Cisco Firepower device health information. Which two widgets must be configured to provide this information? (Choose two.)
- A. Appliance Status
- B. Correlation Information
- C. Intrusion Events
- D. Network Compliance
- E. Current Sessions
Answer: A,C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/ dashboards.html#ID-2206-00000283
NEW QUESTION # 202
Refer to the exhibit.
An engineer is modifying an access control policy to add a rule to Inspect all DNS traffic that passes it making the change and deploying the policy, they see that DNS traffic Is not being Inspected by the Snort engine.
What is......
- A. The action of the rule is set to trust instead of allow.
- B. The rule must specify the security zone that originates the traffic.
- C. The rule Is configured with the wrong setting for the source port.
- D. The rule must define the source network for inspection as well as the port.
Answer: A
NEW QUESTION # 203
A network administrator has converted a Cisco FTD from using LDAP to LDAPS for VPN authentication. The Cisco FMC can connect to the LDAPS server, but the Cisco FTD is not connecting. Which configuration must be enabled on the Cisco FTD?
- A. The LDAPS must be allowed through the access control policy.
- B. The RADIUS server must be defined.
- C. SSL must be set to a use TLSv1.2 or lower.
- D. DNS servers must be defined for name resolution.
Answer: D
Explanation:
A DNS record for the AD server is required because LDAPS clients typically use DNS to locate the domain controller hosting the AD server. The DNS record for the AD server helps clients resolve the server's hostname to its IP address.
NEW QUESTION # 204
Which Cisco Advanced Malware Protection for Endpoints policy is used only for monitoring endpoint actively?
- A. triage
- B. Windows domain controller
- C. audit
- D. protection
Answer: C
Explanation:
Log the detection: In this mode, the identified malicious process is not blocked by MAP, but the detection is logged in the AMP for Endpoints console. (This is Audit mode, where no blocking or quarantine action happens, but the detection is logged.)
https://www.cisco.com/c/en/us/products/collateral/security/amp-for-endpoints/white-paper-c11-740980.html
NEW QUESTION # 205
Refer to the exhibit.
An administrator is looking at some of the reporting capabilities for Cisco Firepower and noticed this section of the Network Risk report showing a lot of SSL activity that cloud be used for evasion. Which action will mitigate this risk?
- A. Use Cisco Tetration to track SSL connections to servers.
- B. Use encrypted traffic analytics to detect attacks
- C. Use Cisco AMP for Endpoints to block all SSL connection
- D. Use SSL decryption to analyze the packets.
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/623/fdm/fptd-fdm-config-guide-623/fptd-fdm-ssl-decryption.html
NEW QUESTION # 206
Refer to the exhibit.
A systems administrator conducts a connectivity test to their SCCM server from a host machine and gets no response from the server. Which action ensures that the ping packets reach the destination and that the host receives replies?
- A. Modify the Snort rules to allow ICMP traffic.
- B. Create an access control policy rule that allows ICMP traffic.
- C. Create an ICMP allow list and add the ICMP destination to remove it from the implicit deny list.
- D. Configure a custom Snort signature to allow ICMP traffic after Inspection.
Answer: B
NEW QUESTION # 207
Refer to the exhibit.
What must be done to fix access to this website while preventing the same communication to all other websites?
- A. Create an intrusion policy rule to have Snort allow port 80 to only 172.1.1 50.
- B. Create an intrusion policy rule to have Snort allow port 443 to only 172.1.1.50
- C. Create an access control policy rule to allow port 443 to only 172.1.1 50
- D. Create an access control policy rule to allow port 80 to only 172.1.1 50.
Answer: D
NEW QUESTION # 208
Users report that Cisco Duo 2FA fails when they attempt to connect to the VPN on a Cisco Secure Firewall Threat Defense (FTD) device IT staff have VPN profiles that do not require multifactor authentication and they can connect to the VPN without any issues When viewing the VPN troubleshooting log in Cisco Secure Firewall Management Centre (FMC), the network administrator sees an error in the Cisco Duo AAA server has been marked as tailed. What is the root cause of the Issue?
- A. The internal AD server is unreachable from the Secure FTD device.
- B. AD Trust certificates are missing from the Secure FTD device.
- C. Multifactor authentication Is not supported on Secure FMC managed devices.
- D. Duo trust certificates are missing from the Secure FTD device.
Answer: D
Explanation:
If users report that Cisco Duo 2FA fails when attempting to connect to the VPN on a Cisco Secure Firewall Threat Defense (FTD) device, and the VPN troubleshooting log in FMC shows an error indicating that the Cisco Duo AAA server has been marked as failed, the root cause is likely missing Duo trust certificates on the FTD device. Trust certificates are essential for establishing a secure and trusted connection between the FTD and the Duo authentication service.
Steps:
* Obtain the necessary Duo trust certificates.
* Install the certificates on the FTD device.
* Verify the configuration to ensure that the FTD device can properly communicate with the Duo AAA server.
This resolves the authentication failure by ensuring that the FTD device can trust the Duo server.
References: Cisco Secure Firewall Management Center Administrator Guide, Chapter on Certificate Management.
NEW QUESTION # 209
Refer to the exhibit.
What is the effect of the existing Cisco FMC configuration?
- A. The remote management port for communication between the Cisco FMC and the managed device changes to port 8443.
- B. The managed device is deleted from the Cisco FMC.
- C. The management connection between the Cisco FMC and the Cisco FTD is disabled.
- D. The SSL-encrypted communication channel between the Cisco FMC and the managed device becomes plain-text communication channel.
Answer: C
NEW QUESTION # 210
An organization has a Cisco IPS running in inline mode and is inspecting traffic for malicious activity. When traffic is received by the Cisco IRS, if it is not dropped, how does the traffic get to its destination?
- A. It is routed back to the Cisco ASA interfaces for transmission.
- B. It is retransmitted from the Cisco IPS inline set.
- C. It is transmitted out of the Cisco IPS outside interface.
- D. The packets are duplicated and a copy is sent to the destination.
Answer: A
NEW QUESTION # 211
An engineer runs the command restore remote-manager-backup location 2.2.2.2 admin /Volume/home/admin FTD408566513.zip on a Cisco FMC. After connecting to the repository, the Cisco FTD device is unable to accept the backup file. What is the reason for this failure?
- A. The backup file is not in .cfg format.
- B. The wrong IP address is used.
- C. The backup file extension was changed from .tar to .zip.
- D. The directory location is incorrect.
Answer: C
NEW QUESTION # 212
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
Explanation
Explanation
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/firepower_management_center_high_availability.html#id_32288
NEW QUESTION # 213
A security engineer is configuring an Access Control Policy for multiple branch locations.
These locations share a common rule set and utilize a network object called INSIDE_NET which contains the locally significant internal network subnets at each location.
What technique will retain the policy consistency at each location but allow only the locally significant network subnet within the applicable rules?
- A. creating an ACP with an INSIDE_NET network object and object overrides
- B. creating a unique ACP per device
- C. utilizing policy inheritance
- D. utilizing a dynamic ACP that updates from Cisco Talos
Answer: A
NEW QUESTION # 214
An engineer must investigate a connectivity issue from an endpoint behind a Cisco FTD device and a public DNS server. The endpoint cannot perform name resolution queries. Which action must the engineer perform to troubleshoot the issue by simulating real DNS traffic on the Cisco FTD while verifying the Snarl verdict?
- A. Create a Custom Workflow in Cisco FMC.
- B. Run me system support firewall-engine-debug command from me FTD CLI.
- C. Use the Capture w/Trace wizard in Cisco FMC.
- D. Perform a Snort engine capture using tcpdump from the FTD CLI.
Answer: C
Explanation:
The Capture w/Trace wizard in Cisco FMC allows you to capture packets on an FTD device and trace their path through the Snort engine. This can help you troubleshoot connectivity issues from an endpoint behind an FTD device and a public DNS server, as well as verify the Snort verdict for the DNS traffic. The Capture w/Trace wizard lets you specify the source and destination IP addresses, ports, and protocols for the packets you want to capture and trace, as well as the FTD device and interface where you want to perform the capture.
You can also apply filters to limit the capture size and duration. After you start the capture, you can ping the DNS server from the endpoint and then view the captured packets and their Snort verdicts in the FMC web interface2.
To use the Capture w/Trace wizard in Cisco FMC, you need to follow these steps2:
* In the FMC web interface, navigate to Troubleshooting > Capture/Trace.
* Click New Capture.
* Choose an FTD device from the Device drop-down list.
* Choose an interface from the Interface drop-down list.
* Enter the source and destination IP addresses, ports, and protocols for the packets you want to capture and trace. For example, if you want to capture DNS queries from an endpoint with IP address 10.1.1.100 to a DNS server with IP address 8.8.8.8, you can enter these values:
* Source IP: 10.1.1.100
* Source Port: any
* Destination IP: 8.8.8.8
* Destination Port: 53
* Protocol: UDP
* Optionally, apply filters to limit the capture size and duration. For example, you can set the maximum number of packets to capture, the maximum capture file size, or the maximum capture time.
* Click Start.
* Ping the DNS server from the endpoint and wait for some packets to be captured.
* Click Stop to stop the capture.
* Click View Capture to see the captured packets and their Snort verdicts.
The other options are incorrect because:
* Performing a Snort engine capture using tcpdump from the FTD CLI will not allow you to trace the path of the packets through the Snort engine or verify their Snort verdicts. Tcpdump is a command-line tool that can capture packets on an FTD device, but it does not provide any information about how Snort processes those packets or what actions Snort takes on them2.
* Creating a Custom Workflow in Cisco FMC will not help you troubleshoot a connectivity issue from an endpoint behind an FTD device and a public DNS server. A Custom Workflow is a user-defined set of pages that display event data in different formats, such as tables, charts, maps, and so on. A Custom Workflow does not allow you to capture or trace packets on an FTD device3.
* Running the system support firewall-engine-debug command from the FTD CLI will not allow you to simulate real DNS traffic on the FTD device or verify the Snort verdict for that traffic. The firewall-engine-debug command is a diagnostic tool that can generate synthetic packets and send them through the Snort engine on an FTD device. The synthetic packets are not real network traffic and do not affect any connections or policies on the FTD device4.
NEW QUESTION # 215
An engineer is troubleshooting a device that cannot connect to a web server. The connection is initiated from the Cisco FTD inside interface and attempting to reach 10.0.1.100 over the non-standard port of 9443 The host the engineer is attempting the connection from is at the IP address of 10.20.10.20. In order to determine what is happening to the packets on the network, the engineer decides to use the FTD packet capture tool Which capture configuration should be used to gather the information needed to troubleshoot this issue?
A)
B)
C)
D)
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: C
NEW QUESTION # 216
Refer to the exhibit. A network engineer is analyzing a Network Risk Report generated in Cisco Secure Firewall Management Center that focuses on network security and efficient bandwidth utilization. Which application should be restricted?
- A. SSH
- B. BitTorrent
- C. SFTP
- D. Tivoli
Answer: B
NEW QUESTION # 217
A network administrator is configuring an instance of Cisco Secure Firewall Threat Defense, which is registered to Cisco Secure Firewall Management Center, to prevent internal users from downloading executable files from the internet. What must be created and configured by the administrator to meet the requirement?
- A. access policy rule that allows users to reach the internet with a second rule that blocks application executables
- B. access policy rule that allows users to reach the internet and assigns a file policy that blocks executable downloads to the rule
- C. file policy rule that allows users to reach the internet with a second rule applied that blocks application use of FTP
- D. file policy that blocks downloads of all executable files and applies the file policy to the default action in the access policy
Answer: B
NEW QUESTION # 218
An organization has noticed that malware was downloaded from a website that does not currently have a known bad reputation. How will this issue be addresses globally in the quickest way possible and with the least amount of impact?
- A. Cisco Talos will automatically update the policies.
- B. by creating a URL object in the policy to block the website
- C. by denying outbound web access
- D. by Isolating the endpoint
Answer: B
NEW QUESTION # 219
......
Cisco 300-710 exam is a 90-minute exam that consists of about 65-75 questions. 300-710 exam is available in English and Japanese languages and can be taken at any Pearson VUE testing center globally. 300-710 exam tests the knowledge and skills of individuals in topics such as deployment, management, and troubleshooting of Cisco Firepower NGIPS and NGFW solutions.
Cisco 300-710 (Securing Networks with Cisco Firepower) Certification Exam is designed for individuals who want to validate their knowledge and skills in implementing and managing the Cisco Firepower Next-Generation Firewall (NGFW). 300-710 exam is part of the Cisco Certified Network Professional Security (CCNP Security) certification, which is a professional-level certification that validates a candidate's ability to implement, configure, and troubleshoot Cisco network security solutions.
Actual Questions Answers Pass With Real 300-710 Exam Dumps: https://torrentpdf.practicedump.com/300-710-exam-questions.html