[2025] 2V0-13.24 by VMware Professional Actual Free Exam Practice Test
Free VMware Professional 2V0-13.24 Exam Question
VMware 2V0-13.24 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 69
A VMware Cloud Foundation multi-AZ (Availability Zone) design mandates that:
* All management components are centralized.
* The availability SLA must adhere to no less than 99.99%.
What would be the two design decisions that would help satisfy those requirements? (Choose two.)
- A. Configure a separate VLAN for the infrastructure management components within each AZ.
- B. Configure a stretched L2 VLAN for the infrastructure management components between the AZs.
- C. Choose two close proximity AZs and configure a stretched management workload domain.
- D. Configure VMware Live Recovery between the selected AZs.
- E. Choose two distant AZs and configure distinct management workload domains.
Answer: B,C
NEW QUESTION # 70
Which design decision is crucial when designing a VMware Cloud Foundation physical infrastructure for a VCF Workload Domain?
Response:
- A. The determination of storage requirements for the workload domain
- B. The assignment of IP addresses for public access
- C. The physical location of data centers across geographical regions
- D. The configuration of vCenter servers to be used in the workload domain
Answer: A
NEW QUESTION # 71
Which two outcomes should be achieved by creating a conceptual model in the planning phase of VMware Cloud Foundation?
(Choose two)
Response:
- A. Map out the entire infrastructure, including hardware specifics
- B. Establish the overall architecture for the deployment
- C. Provide detailed information on storage policies
- D. Align the technical design with business requirements
Answer: B,D
NEW QUESTION # 72
Due to limited budget and hardware, an administrator is constrained to a VMware Cloud Foundation (VCF) consolidated architecture of seven ESXi hosts in a single cluster. An application that consists of two virtual machines hosted on this infrastructure requires minimal disruption to storage I/O during business hours.
Which two options would be most effective in mitigating this risk without reducing availability? (Choose two.)
- A. Replace the vSAN shared storage exclusively with an All-Flash Fibre Channel shared storage solution
- B. Perform all host maintenance operations outside of business hours
- C. Apply 100% CPU and memory reservations on these virtual machines
- D. Enable fully automatic Distributed Resource Scheduling (DRS) policies on the cluster
- E. Implement FTT=1 Mirror for this application virtual machine
Answer: B,E
NEW QUESTION # 73
When sizing a VMware Cloud Foundation VI Workload Domain, which three factors should be considered when calculating usable compute capacity? (Choose three.)
- A. NSX
- B. Storage DRS
- C. Core Dumps
- D. NIOC
- E. vSphere HA
- F. vSAN
Answer: D,E,F
Explanation:
When sizing a VMware Cloud Foundation (VCF) VI Workload Domain, calculating usable compute capacity involves determining the resources available for workloads after accounting for overheads and system-level requirements. In VCF 5.2, a VI Workload Domain integrates vSphere, vSAN, and NSX, and certain factors directly impact the compute capacity available to virtual machines. Based on the official VMware Cloud Foundation 5.2 documentation, the three key factors to consider are vSphere HA, vSAN, and NIOC.
NEW QUESTION # 74
An architect is designing a new VMware Cloud Foundation (VCF) solution. During the discovery workshops, the customer explained that the solution will initially be used to host a single business application and some internal management tooling. The customer provided the following background information:
The business application consists of two virtual machines.
The business application is sensitive to changes in its storage I/O.
The business application must be available during the company's business hours of 9 AM - 5 PM on weekdays.
The architect has made the following design decisions in response to the customer's requirements and the additional information provided during discovery:
The solution will use the VCF consolidated architecture model.
A single cluster will be created, consisting of six ESXi hosts.
Which design decision should the architect include in the design to mitigate the risk of impacting the business application?
- A. Implement FTT=6 for the business application virtual machines.
- B. Use Anti-Affinity Distributed Resource Scheduler (DRS) rules on the business application virtual machines.
- C. Perform ESXi host maintenance activities outside of the stated business hours.
- D. Replace the vSAN shared storage exclusively with an All-Flash Fibre Channel shared storage solution.
- E. Use resource pools to apply CPU and memory reservations on the business application virtual machines.
Answer: C
Explanation:
The VCF 5.2 design must ensure the business application (two VMs) remains available during business hours (9 AM - 5 PM weekdays) and is protected from storage I/O disruptions in a consolidated architecture with a single six-host cluster using vSAN. The goal is to mitigate risks to the application's performance and availability. Let's evaluate each option:
Option A: Use resource pools to apply CPU and memory reservations on the business application virtual machinesResource pools with reservations ensure CPU and memory availability, which could help performance. However, the application's sensitivity is tostorage I/O, not CPU/memory, and the availability requirement (business hours) isn't directly addressed by reservations. While useful, this doesn't fully mitigate the primary risks identified, making it less optimal.
Option B: Implement FTT=6 for the business application virtual machinesThis is incorrect and infeasible. In vSAN, Failures to Tolerate (FTT) defines the number of host or disk failures a storage object can withstand, with a maximum FTT dependent on cluster size. FTT=6 requires at least 13 hosts (2n+1 where n=6), but the cluster has only six hosts, supporting a maximum FTT=2 (RAID-5/6). Even if feasible, FTT addresses data redundancy, not runtime availability or I/O sensitivity during business hours, making this irrelevant to the stated risks.
Option C: Perform ESXi host maintenance activities outside of the stated business hoursThis is the correct answer. In a vSAN-based VCF cluster, ESXi host maintenance (e.g., patching, reboots) triggers data resyncs and VM migrations (via vMotion), which can impact storage I/O performance and potentially cause brief disruptions. The application's sensitivity to storage I/O and its availability requirement (9 AM - 5 PM weekdays) mean maintenance during business hours poses a risk. Scheduling maintenance outside these hours (e.g., nights or weekends) mitigates this by ensuring uninterrupted I/O performance and availability during critical times, directly addressing the customer's needs.
Option D: Replace the vSAN shared storage exclusively with an All-Flash Fibre Channel shared storage solutionThis is incorrect. While an All-Flash Fibre Channel array might offer better I/O performance, VCF's consolidated architecture relies on vSAN as the primary storage for management and workload domains.
Replacing vSAN entirely contradicts the chosen architecture and introduces unnecessarycomplexity and cost.
The sensitivity to storage I/O changes doesn't justify abandoning vSAN, especially since All-Flash vSAN could meet performance needs if properly tuned.
Option E: Use Anti-Affinity Distributed Resource Scheduler (DRS) rules on the business application virtual machinesAnti-Affinity DRS rules ensure the two VMs run on separate hosts, improving availability by avoiding a single host failure impacting both. While this mitigates some risk, it doesn't address storage I/O sensitivity (a vSAN-wide concern) or guarantee availability during business hours if maintenance occurs. It's a partial solution but less effective than scheduling maintenance outside business hours.
Conclusion:The best design decision is toperform ESXi host maintenance activities outside of the stated business hours(Option C). This directly mitigates the risk of storage I/O disruptions and ensures availability during 9 AM - 5 PM weekdays, aligning with the customer's requirements in the VCF 5.2 consolidated architecture.
References:
VMware Cloud Foundation 5.2 Architecture and Deployment Guide (Section: Consolidated Architecture Design) VMware vSAN 7.0U3 Planning and Deployment Guide (integrated in VCF 5.2): Maintenance Mode Considerations VMware Cloud Foundation 5.2 Planning and Preparation Guide (Section: Availability and Performance Design)
NEW QUESTION # 75
Which two factors need to be considered when scaling a VMware Cloud Foundation environment?
(Choose two)
Response:
- A. Available storage capacity
- B. Number of physical CPUs in the data center
- C. Number of virtual machines to be deployed
- D. Network bandwidth requirements
Answer: A,D
NEW QUESTION # 76
An architect has been tasked with reviewing a VMware Cloud Foundation design document. Observe the following requirements:
* REQ01: The solution must provide the ability to request new tenant creation with multi-site and different size options.
* REQ02: The solution must provide the capability to monitor the software-defined data center for capacity and performance.
* REQ03: The solution must provide the ability to generate reports with customized metrics to meet business requests.
* REQ04: The solution should report all capacity planning components (such as current capacity usage monthly and annual usage growth).
* REQ05: The solution must provide the ability to provision new virtual machines from predefined templates.
* REQ06: The solution must provide a self-service catalog for end-users to consume services.
Observe the following design decisions:
* DD01: There will be a centralized deployment of Aria Operations Management.
* DD02: There will be customized super-metrics based on existing metrics.
Based on the stated requirements and design decisions, which three requirements does this design decision satisfy? (Choose three.)
- A. REQ03
- B. REQ06
- C. REQ04
- D. REQ01
- E. REQ05
- F. REQ02
Answer: A,C,F
NEW QUESTION # 77
Which two strategies are critical for securing workloads in a VMware Cloud Foundation environment?
(Choose two)
Response:
- A. Encrypting all virtual machines with VMware vSphere encryption
- B. Using a separate storage network to isolate data access from compute
- C. Deploying VMware NSX to configure micro-segmentation for enhanced security
- D. Enabling vSphere HA for automatic recovery of virtual machines
Answer: A,D
NEW QUESTION # 78
As part of a new VMware Cloud Foundation (VCF) deployment, a customer is planning to implement vSphere IaaS control plane. What component could be installed and enabled to implement the solution?
- A. Storage DRS
- B. Aria Operations
- C. NSX Edge networking
- D. Aria Automation
Answer: D
NEW QUESTION # 79
What is the main purpose of VMware NSX within the VMware Cloud Foundation environment?
Response:
- A. Monitoring and analytics
- B. Storage management
- C. Virtual machine migration
- D. Network virtualization and security
Answer: D
NEW QUESTION # 80
Which option in VMware Cloud Foundation allows you to roll back an operation in case of a failure during the deployment?
Response:
- A. VMware Aria Operations
- B. VMware vCenter Server
- C. VMware Cloud Foundation Lifecycle Manager
- D. VMware vRealize Automation
Answer: C
NEW QUESTION # 81
What is a primary advantage of deploying VMware Cloud Foundation in a multi-cloud environment?
Response:
- A. Increased security with on-premises encryption
- B. Reduced complexity of the management domain
- C. Enhanced disaster recovery options with cross-region replication
- D. Improved performance due to centralized data storage
Answer: C
NEW QUESTION # 82
What should be included in a conceptual model to ensure it reflects the scalability of the VMware Cloud Foundation solution?
(Choose two)
Response:
- A. The ability to scale storage and compute independently
- B. The specific models and configurations of network switches
- C. Logical groupings of compute, storage, and networking resources
- D. The types of servers to be used for deployment
Answer: A,C
NEW QUESTION # 83
An architect is working with an organization on the creation of a new Private Cloud Platform. The organization has provided the following business objectives they wish to achieve with the new platform:
* Reduce the operating costs associated with running separate areas of hosting capacity and separate/duplicate systems.
* Reduce the risks, time, and effort associated with managing platforms that are out of vendor support.
* Reduce the operating costs associated with Public Cloud usage.
* Reduce the risks associated with having incomplete documentation for application inventory and dependency mappings.
They have grouped these business objectives into a set of use cases:
* Migration - Provide a platform that supports the migration of virtualized workloads from existing platforms.
* Containerization - Provide a platform that supports the deployment of containerized workloads.
* Centralization and Consolidation - Provide a central private cloud platform accessible to all relevant areas of the business.
When considering these objectives and use cases, what should the architect include in the design documentation as a part of the Conceptual Model?
- A. A requirement that the solution will provide the capability to migrate Kubernetes-based workloads from the Public Cloud
- B. An assumption that the new platform will co-exist with the existing platforms for a period of time to allow workloads to be migrated in a phased approach
- C. An assumption that a complete mapping of application dependencies is not available
- D. A risk that the existing platforms are running Linux Operating Systems that are out of vendor support
Answer: B
NEW QUESTION # 84
......
VMware 2V0-13.24 Actual Questions and Braindumps: https://torrentpdf.practicedump.com/2V0-13.24-exam-questions.html